Convert HDMI Signal to HD Digital TV SIgnal Over Existing Coax
The OMX-HDMI-COAX HDMI extender converts HDMI signals to HD digital TV signals using DVB-T CATV transmission mode. Unlike traditional analog CATV signal, this extender uses 64 QAM mode to convert the signal and transmits via coaxial cables for long distances. Using a CATV splitter, you can easily create a one to multiple or a multiple to multiple matrix. Short cable runs may require an attenuator, please refer to product manual for specifics.

Excellent image quality, high interference resistance, and many available channels, make it ideal for total home CCTV, digital signage, shopping mall advertising, and digital KVM.

• Full 1080P HD
• Resolution: supports up to 1920x1080@60Hz
• 99 Selectable Channels - allows multiple units on the same coax!

• TX - HDMI Input
• RX - HDMI Output
• 99 Selectable Channels
• Input and Output: 480i@60Hz, 480P@60Hz, 576i@50Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz,1080P@50/60Hz
• HDMI Graphics Resolution: supports up to 1920x1080@60Hz
• Video Encoding: H.264
• Audio Encoding: MPEG2
• Coaxial Cable: RG6, RG7, RG11, etc
• Frequency Point: 100-1000M
• Bit Rate: Max 31.6M bits
• Insertion Loss: <2dBm
• RF TX Output Consumption: +0dBm
• RF Connector: Imperial System 75 Ω Type F
• Transmission Delay: 500ms
• Power Consumption: TX <3.5W, RX <3W
• Dimensions (LWH): 5.12 x 2.68 x 0.945 inches
• Weight: TX: 5 oz/142 g, RX: 5.12 oz/145 g
• Warranty: 1 year

• 1 HDMI to RF transmitter (TX)
• 1 RF to HDMI receiver (RX)
• 2 DC 5V, 1A power supplies